Circulation Motor; Detergent Dispenser- Thermic Actuator - Blomberg DW 14110 NBL00 Service Manual

9.3.

Circulation Motor

Asynchronous
It is the 1 phase-asynchronous motor which is used for circulation of the water inside the
dishwasher. The motor is protected by thermic against the problems that may occur due to
overheating .
Voltage range
Power
To measure resistance of master wrapping, resistance is measured by multimeter using yellow
and black cables.
This values should be in interval of 7 ohms - 13 ohms.
To measure resistance of slave wrapping, resistance is measured by multimeter using yellow and
purple cables.
This values should be in interval of 23 ohms - 29 ohms.
9.4.

Detergent Dispenser- Thermic Actuator

It is used to run the mechanism which unlocks the detergent dispenser cover. With the
mechanism, detergent dispenser cover is unlocked by first energizing. And with the second
energizing, polisher. To complete the thermal movement of the pusher mechanism 60 seconds
is needed.
: 110 – 120 Vac 60 Hz
: 130 W
Resistance
In order to detect the fault, the resistance is measured when the
multimeter is in the position as shown in the figure. It is
compared with the values above.
BUILT- UNDER DISHWASHER
: 2Kohm - 2,2 Kohm (25ºC)
54 2011