Program Flow - Blomberg DW 14110 NBL00 Service Manual

8.3.

Program Flow

In a standard wash cycle there exists 5 steps.
Pre wash
Main Wash
st
1 rinse
nd
2 rinse
Drying and regeneration step
In pre-wash step, soiled dishes get wet and rough dirt particules moved from dish surfaces. In
main wash cycle, wash water is heated and detergent is added to clean dishes. In 1
cycle detergent and soil particules moved from dish surfaces with fresh water. And finaly in the
nd
2 rinse cycle rinsing continuos with new fresh and hot water. Also rinsing agents can be
dosed inside the rinsing water to maintain more shiny and dry dishes.
The last step is the drying. In this step wash water is drained and the dishes waited in the hot
washing chamber. If availeble a drying fan is activated to circulate and discharge the moist air
from wash chamber.
If there is a water softenning unit integrated to the dishwasher. The regenration cycle fort he
resin takes place in drying cycle when needed. In the regeneration cycle salty water solution is
diverted to the resin container via regeneration valve which is on the water softener unit. The
resin is waited in the salty water solution till the regeneration of the resin is completed. Than
the resin is washed with fresh water.
The washing and drying cycles ends with the final drain.
BUILT- UNDER DISHWASHER
52
st
rinse
2011