Mitsubishi Electric GOT2000 Series User Manual page 473

■2. Clock display
Carry out the display and setting of GOT clock data. The setup methods of clock data are shown below.
Step 1.
Touch either the date or time to be changed.
Step 2.
Enter date or time on the ten-key pad.
The day of the week is displayed automatically according to the input date.
"0" to "9":
Use these keys to enter numerical values
"ESC":
Closes the ten-key window without saving any value entered for the date or time
"AC":
Deletes the entire string of numerical characters that are being entered
"DEL":
Deletes a digit from a string of numerical characters that are being entered
"ENT":
Enters the value for the date or clock that has been entered and closes the ten-key pad window
"+/-":
Switches between positive and negative values. (Only positive values are valid for the date or clock setting.)
".":
Invalid key (not used)
Step 3.
After setting either the date or time, touch the
■3. GOT internal battery voltage status (GT2103-P is excluded.)
Displays battery voltage status.
When the battery voltage is low, replace the battery immediately.
Refer to the following for battery replacement procedure.
➠
GOT2000 Series User's Manual (Hardware)
(4) Operation setting by GT Designer3
Set the clock management at [GOT set up] in [Environmental Setting] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
➠
GT Designer3 (GOT2000) Help
Touch the item
to be changed.
Display
Normal
Low/None
button to save the changes and close the setting window.
Status
Normal
Low voltage
14.1 Time Setting and Display
14
14 - 3