Andon Connection; Andon Connection Setting - Mitsubishi Electric GOT2000 Series User Manual

3.12 ANDON Connection

3.12.1

ANDON connection setting

You can set the IP address of a client that connects to the GOT without the operator name and password-based
authentication. (The authentication screen does not appear.)
For the details of the ANDON connection, refer to the following.
➠
Item
ANDON IP filter usage
Range
Target IP address
*1
3 - 54
3.12 ANDON Connection
GOT2000 Series User's Manual (Monitor)
Set whether to limit the IP addresses targeted for the ANDON connection.
Set whether to set IP addresses by specifying a range.
To specify a range, set the start IP address and the end IP address in [Target
IP address].
Set the IP addresses or IP address ranges targeted for the ANDON
connection.
Up to five settings can be made.
Leave the boxes blank if you do not set any IP addresses.
Description Setting range
Yes/No
<Default: Yes>
Selected/Not selected
<Default: Not selected>
*1
0.0.0.0 to 255.255.255.255
<Default: Blank>