Autoreclose; Remote Devices - GE L90 Instruction Manual

6 ACTUAL VALUES
!
PATH: ACTUAL VALUES STATUS

# AUTORECLOSE

#
The automatic reclosure shot count is shown here.
a) STATUS
!
PATH: ACTUAL VALUES STATUS

# REMOTE DEVICES

# STATUS
MESSAGE
MESSAGE
The present state of up to 16 programmed Remote Devices is shown here. The
cates whether or not all programmed Remote Devices are online. If the corresponding state is "No", then at least one
required Remote Device is not online.
b) STATISTICS
!
PATH: ACTUAL VALUES STATUS
# REMOTE DEVICE
1
#
MESSAGE
Statistical data (2 types) for up to 16 programmed Remote Devices is shown here.
The StNum number is obtained from the indicated Remote Device and is incremented whenever a change of state of at
least one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated Remote Device and is incremented
whenever a GSSE message is sent. This number will rollover to zero when a count of 4,294,967,295 is incremented.
GE Multilin
!"
AUTORECLOSE
AUTORECLOSE
SHOT COUNT:
!"
REMOTE DEVICES STATUS
All REMOTE DEVICES
ONLINE: No
REMOTE DEVICE 1
STATUS: Offline
↓
REMOTE DEVICE 16
STATUS: Offline
!"
REMOTE DEVICES STATISTICS
REMOTE DEVICE 1
StNum:
REMOTE DEVICE 1
SqNum:
L90 Line Differential Relay
Range: 0, 1, 2, 3, 4
0
Range: Yes, No
Range: Online, Offline
Range: Online, Offline
ALL REMOTE DEVICES ONLINE
!
REMOTE DEVICE 1(16)
0
0
6.2 STATUS
6.2.7 AUTORECLOSE
6.2.8 REMOTE DEVICES
message indi-
6-5
6