Hitachi IJ RX2 Technical Manual page 76

(2)Specify Horizontal/Vertical directions and move
● Specify the number of dots for moving and the print item will be moved.
● Horizontal and Vertical move
ESC2 Header 24H
Horizontal sign/Vertical sign
(Input either one of the two.)
2BH: " ＋ (plus)"
2DH:" － (minus)"
-- Either plus(+) or minus(-) sign to be input for both Horizontal/Vertical directions.
-- In case there will be NO horizontal move, input either "+00000" or "-00000".
-- In case there will be NO vertical move, input either "+00" or "-00".
● Horizontal move
ESC2 Header 24H
Horizontal sign
(Input either one of the two.)
2BH: " ＋ (plus)"
2DH:" － (minus)"
-- Either plus(+) or minus(-) sign to be input for Horizontal direction.
-- In case there will be NO horizontal move, input either "+00000" or "-00000".
● Vertical move
ESC2
-- Either plus(+) or minus(-) sign to be input for Vertical direction.
-- In case there will be NO vertical move, input either "+00" or "-00".
5-20 ●Transmission Sequences
Classification
41H
Item number
(1 to 100)
Horizontal
sign
Vertical
sign
Classification
42H
Item number
(1 to 100)
Horizontal
Classification
Header 24H
43H
Item number
(1 to 100)
Vertical sign
(Input either one of the two.)
2BH: " ＋ (plus)"
2DH:" － (minus)"
Item
(Contd.)
number
10000s
1000s place 100s place
place
Horizontal (X) direction
(-31998 to +31998)
10s place Unit place
Vertical (Y) direction
(-29 to +29)
Item
(Contd.)
number
10000s
1000s place 100s place
sign place
Horizontal (X) direction
(-31998 to +31998)
Item Vertical
10s place
number sign
Vertical (Y) direction
(-29 to +29)
10s place Unit place
10s place Unit place
Unit place
(Contd.)