Replacing The Air Filter - Hitachi IJ RX2 Technical Manual

Replacing the air filter

Trun off the power.
1
2 Loosen the knobs (thumb screws) and remove the intake fan cover.
Remove the old filter and set the new filter.
3
(Please set the new filter with red-mark being invisible.)
Set the intake fan cover. (Turn the knobs until the intake fan cover comes into
4
contact with the printer.)
7-2 ●Maintenance service
Printer
Turn the knob (Thumb screws) until comes into contact.
Intake fan cover
Knob (thumb Screw)
Air filter
Red-mark inside