Circulation Control Screen Operation - Hitachi IJ RX2 Technical Manual

6.1 Circulation control screen operation

Start from the Maintenance menu.
1
Perform menu 1 and menu 2 switching using Prev. menu and Next menu .
Circulation control
1st menu
Select option; press [Start/Cont.]
Circulation control
2nd menu
Select option; press [Start/Cont.]
Select the function you want to perform and press Start/Continue .
2
Different operation guides are displayed depending on the selected function.
3
● Perform operation in accordance with the operation guide.
● When you want to stop operation, press Abort .
Eject ink
Cleaning stop
(Goes to Standby)
Recovery-line
Nozzle backwash
cleaning
Ink filter
Ink replacement
replacement
Process prior to Process after
long-term shutdown long-term shutdown
Ink refill
Ink drainage
Ink stream
Pressure relief
alignment
Parts usage time Circulation system
management environment setup
[Stop ]
Com=0
No-cleaning stop
Ink circulation
Makeup refill
Proc. status:
[Stop ]
Com=0
Proc. status:
2015.07.07 12:45
HOME
Prev.Dsp. Next Dsp.
Cancel
Start/Continue
Start/Continue
2015.07.07 12:45
HOME
Prev.Dsp. Next Dsp.
Cancel
Start/Continue
Start/Continue
●Circulation control screen operation 6-2