Operation (Basic Operation) - Panasonic AAD03011 Instruction Manual

Operation (Basic Operation)

! Caution
Always close the terminal cover before turning the input power ON.
Do not open the terminal cover while the power is ON.
Failure to do so could lead to electric shock.
Do not operate the buttons with wet hands.
Failure to do so could lead to electric shock.
Do not touch the inverter terminals when the inverter power is ON or even
when the inverter is stopped.
Failure to do so could lead to electric shock.
The STOP button is not designed for emergency stop purposes.
Prepare a separate emergency stop switch.
Failure to do so could lead to electric shock.
Always confirm the security and function operation of the elevator system
before obstacle detection function is applied.
Failure to do so could lead to injury.
Make sure to input safety sensor in the main controller of the elevator and
to operate the door's obstacle detection on the main controller side.
Obstacle detection function of the inverter does not operate in the CLOSE
arrival area.
Always take dual security measures.
Failure to do so could lead to injury.
Make sure to input arrival signal (limit switch etc.) in the main controller of
the lift and to operate the door's obstacle detection on the main controller side.
Do not operate obstacle detection of the door only with OPEN/CLOSE arrival
signal (input signal and the relay's output signal).
Failure to do so could lead to injury.
Depending on different settings of the fault OPEN operation forced operation
time and the stop selection of OPEN/CLOSE operation, sometimes even
OPEN/ CLOSE signal are both turned OFF, the door does not stop.
Confirm the lift's security and function operation before using this equipment.
(Secure personal safety before carrying out the operation.)
Failure to do so could lead to injury.
Due to setting of the start mode and the ride-through restart function, when
the run signal is ON, the inverter may start (restart) suddenly if the power
is applied or the power is restored after a power failure. Keep out of the
working part of the motor and the machine.
Design the machine so that personal safety can
be ensured even if the inverter starts suddenly.
Failure to so could lead to injury.
23