Bosch C 60 Manual page 89

C 60 Analog and Frequency Inputs
Configuring Inputs – Frequency Inputs
Configuring a frequency input

Example: measurement of wheel speed

Pulse wheel attached to wheel

Each passing tooth of pulse wheel triggers hall sensor

Calculation of wheel speed with wheel circumference

Drag the 'Velocity' digital signal source from the Toolbox and drop it on

the desired 'Rev' input channel in the C 60 project tree
A 'Velocity Wizard' opens

Motorsport
89
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.