Bosch C 60 Manual page 48

CAN Bus Configuration
CAN Bus Trivia
CAN Message

11Bit (standard) or 29 Bit (extended) identifier

Up to 8 bytes of data payload

CAN Bus

Needs termination resistors (120Ohm) in wiring harness

All devices connected to the bus must use identical data rate

Configuration of C 60 bus data rate in 'Properties' menu

Row Counter Concept

Re-use (multiplex) of message identifiers

One byte of message contains row counter

7 bytes payload remaining

Position of row counter is configurable

Message Row
Id Counter
Motorsport
48
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Payload Area