C 60 Recording on USB Memory
Troubleshooting
When no data on the USB device is recorded:
Configure the measurement label usb_mediastate on a RaceCon measurement view
or on a C 60 display page
The value of usb_mediastate reflects the operating condition of the USB bus
0: Wait: Device not found
The USB device is not found
No USB device inserted
USB device is defect
No electrical connection or wiring harness problem
1: Wait: Device detected
A USB device is found, but not yet installed
2: Ok: Media installed
The USB device is found and is operational.
This does not imply that recording data is written!
3: Stop: Device unplugged
The USB device has been removed. The C 60 perform a restart when a USB device is plugged in
4: Ok: Media access
Data is currently written to the USB device
Motorsport
148
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.