Bosch C 60 Manual page 164

Lap Trigger System
Lap Trigger (Timing Beacon)
Setting up a lap trigger for C 60

Select the signal source for the trigger signal

In this example, the Rx is connected to the dedicated lap trigger pin of C 60
Select the source for vehicle speed

In this example, the vehicle speed_vfzg_dls' is calculated from 4 wheel speeds
Enter the track length of your racetrack

In this example 4000m
(Can be changed at any time later)
Press 'Finish' to complete the operation

Motorsport
164
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.