Key Lock Function - Sanyo MCO-5M Instruction Manual

OPERATING INSTRUACTIONS

Key lock function

This unit is provided with a key lock function. When the key lock is ON, change of temperature, CO
O density setting through the key pad is not available.
2
Note: The key lock is set in OFF mode (L0) at the factory.
Display
Procedure for key lock setting (change from key lock OFF to key lock ON)
Description of operation
1
2 Press digit shift key for 5 seconds.
Press numerical value shift key
3
and scroll the figure to 1.
4 Press ENT key.
Note:
• The key lock function is available for temperature, CO
• To cancel the key lock, set to L0 in the above procedure.
27
Mode
Key lock is OFF Enable to change of temperature and CO
Key lock is ON Disable to change of temperature or CO
Key operated
Function
Indication after operation
---- The current chamber temperature is
displayed.
L0 is displayed in the temperature
indicator.
When pressed, the figure of settable
digit changes.
The key lock is set to ON.
ENT
The current chamber temperature is displayed.
density and O density setting.
2 2
83
or
2
setting
2
setting
2