(5) Precautions
shows the output status of the CPU module when the operating status is changed from STOP
Table6.3
to RUN after the outputs (Y) are forcibly turned on in the STOP status.
Table6.3 Output status when the operating status is changed from STOP to RUN after the output forced on operation is performed
Output mode ("Output mode at STOP to RUN") selected
Previous state
Recalculate (output is 1 scan later)
6 - 12
Output status
The output status prior to STOP is output.
Even if the outputs are forcibly turned on, the on status is not held if
the output status prior to STOP was off.
The on status is held and output.