When a user setting system area is created, the available area reduces by the number of steps created in the
area.
(c)
Checking the memory capacity after formatting
Select [Online]
1) Select "Program memory/Device memory" in "Target memory" on the Read from PLC screen.
Click the
2)
The memory capacity appears in "Total free space volume".
3)
5 - 6
[Read from PLC] in GX Developer.
button.
Free space volume
1) Select the target memory.
2) Click the
Free space volume button.
Figure 5.3 Procedure for checking the memory capacity
3) The memory capacity
value is shown.