Panasonic UF-6300 Service Manual page 46

(19)
2.2.16. Rear Chassis (505), SNS1 PC Board (1008)
(4)
(6)
(5)
(7)
(8)
(9)
(20)
(4)
(19) Remove 2 P6L5.5 Bushings (707).
(20) Remove the Pressure Roller (706).
Caution:
Do not scratch the surface of the Pressure Roller
when removing, or reinstalling it.
(1) Remove the Power Supply Unit (Refer to 2.2.12.).
(2) Remove the SC PC Board (Refer to 2.2.12.).
(3) Remove the Fuser Unit (Refer to 2.2.14.).
(4) Remove 6 Screws (19).
(5) Remove the Bracket (403).
(6) Remove the Rear Chassis (505).
(7) Disconnect Connectors CN80, and CN81 on the
SNS1 PC Board (1008).
(8) Remove 1 Screw (19).
(9) Remove the SNS1 PC Board (1008).
46