Panasonic UF-6300 Service Manual page 172

5.1.9. Service Mode 9 (System Maintenance)
5.1.9.1. Overview
This Service Mode is used to maintain or update the firmware of the machine. Use the following
procedure for System Maintenance.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "9".
5 Press "SET" and "START".
Note:
Now the machine is ready to accept programming firmware code from the PC.
1. Connect the machine to the PC with the USB Cable.
2. Start the Firmware Update Tool using the Wizard.
3. The firmware is copied into the machine.
4. After the update is completed, the machine reboots itself and returns to standby.
No. Maintenance Mode
1 FIRMWARE UPDATE
8 SEND RECEIVED FILE
Service Mode 9
Operation or Unit Condition
System Maintenance Table
PC --> Host
Updates the firmware in the machine with the Master Firmware from the
PC. After the firmware is updated, the machine reboots automatically
and returns to standby.
Transfers documents from memory to another fax machine during a fatal
printer error.
Description
172
LCD Display
MMM-dd-yyyy 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
SYSTEM MAINT. (1-8)
1:FIRMWARE UPDATE
FIRMWARE UPDATE(PC)
* IN PROGRESS *