Panasonic UF-6300 Service Manual page 32

(10)
2.2.3. Control Panel Unit, PNL1 PC Board (1004)
(1)
(5)
(4)
(10) Release 3 Latch Hooks.
(11) Remove the Front Cover (104).
(11)
<Replacing & Cleaning Separation Rubber>
(1) Open the Control Panel Unit.
(2) Open the Printer Cover (106).
(3) Remove the Separation Rubber Holder Assy (202).
(4) Replace with a new Separation Rubber (207).
(4)
(5) Clean the Separation Rubber (207) with a soft cloth,
(1) Open the Printer Cover (106)
(2) Slightly open the Control Panel Unit.
(2)
(3) Remove the Left Cover (103), and the Right Cover
(6)
(4) Disconnect Connector CN14 on the SC PC Board.
(5) Release the Stopper Latch (210), and open the
(6) Remove the Control Panel Unit.
dabbed in isopropyl alcohol.
(102). (Refer to 2.2.2.)
Control Panel Unit.
32