Panasonic UF-6300 Service Manual page 123

Code Mode Phase
718 XMT
719 RCV
720 POP
721 POP
722 RCV
725 XMT
POP
726 XMT
POP
729 XMT
730 RCV
731 RCV
800 Relay
Comm.
815 Conf. RCV
816 Conf.
Polled
825 Conf. RCV
Conf.
Polled
870 MEM XMT
Multi-Copy
880 -
884 -
Fax Information Codes
Description of Problem
LAN Page Memory Overflow occurred
while receiving printing data. The
paper size selected within your
application to print is larger than
the paper size loaded in the
cassette(s).
LAN Received data via LAN is in a
format that is not supported.
LAN Unable to connect with the POP
Server.
LAN Unable to login to the POP Server. Incorrect User Name or Password is
LAN Failed to obtain the Network
Parameters (such as: IP Address,
Subnet Mask, Default Gateway IP
Address, etc.) from the DHCP
server.
LAN DNS Server connection timed out.
LAN Received an error response from
the DNS Server.
LAN Failed to authenticate (SMTP
AUTHENTICATION) when
connecting with the SMTP server.
LAN Unable to program the Internet
parameters or the autodialer with
Email from a PC.
LAN Dialer full while Relayed
Transmission Request was
received.
The machine was requested to
relay a document but has no Relay
Hub capability.
Mailbox is full.
"The received Polling Password did
not match. The machine does not
have Confidential Comm.
capability."
Parameter settings of the initial
sending station are not properly
set.
Memory overflow occurred while
storing documents into memory.
- File Access Error.
- File Access Error.
Check the document size and
resolution.
Ask originator to re-send in a supported
size and resolution.
Ask the originator to re-send with a
supported file attachment:
* In a TIFF-F format.
* Image data conforming to A4/Letter
size.
Incorrect POP Server address is set.
POP Server is down.
set.
LAN Cable is disconnected.
DHCP is not available.
(Contact the Network Administrator.)
Incorrect DNS Server address is set.
DNS Server is down.
Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
SMTP AUTHENTICATION, User Name
and/or Password are incorrect.
(Contact the Network Administrator.)
Verify that the Fax Parameter #158 is
set to 2: Valid.
Dial buffer for manual number dialing
(70 stations) are being used.
123
Cause