2.2.9.
LED Array (329), Feed Roller (302)
(2)
(4)
(7)
(9)
(10)
(3)
(5)
(6)
(1) Remove the Scanner Block (321) (Refer to 2.2.8.).
(2) Remove the Ground Plate (317).
(3) Remove 4 Screws (19).
(4) Release the Harness from the hook.
(5) Remove the LED Bracket (306) Assembly.
(6) Remove 3 LED Clips (307).
(7) Remove the LED Array (329).
Caution:
When reinstalling the LED Array, position the 3 LED
Clips at the appropriate locations.
(8) Remove the Gears, Bushings, and the Roller Wire
Spring (Refer to 2.2.6.).
(9) Remove 2 P6A Bushings (316).
(10) Remove the Feed Roller (302).
38