NEC UNIVERGE SV8300 Command Manual page 68

COMMAND CODE
04
Y
No. MEANING
03 Combination of lan-
guage indicated number
and Multiline Terminal
information Printout/
Display language Print-
out
[8300R2]
NOTE: If 2nd data is NONE, combination of language indicated number and Multiline Terminal information
Printout/Display language Printout is set as follows.
Language indicated number
10 A-law/µ-law setting for
the Main Unit
13
14 A-law/µ-law setting for
the Remote Unit
59
TITLE:
DISPLAY LANGUAGE FOR MULTILINE TERMINAL/DESKCON LCD, DEFAULT SETTING
PATTERNS FOR MULTILINE TERMINAL, KIND OF TONE FOR IP STATION/TDM, INQUIRY
NO. IN PASSWORD LOCK STATE FOR DT700 SERIES, SINGLE LINE TELEPHONE
RINGING SIGNAL FOR STATION-TO-STATION CONNECTION, SINGLE LINE TELEPHONE
RINGING SIGNAL FROM A TRUNK, SPECIAL RINGING SIGNAL FOR SINGLE LINE
TELEPHONE RING, SETTING OF SERVICES, A-LAW/µ-LAW SETTING FOR EACH UNIT
1ST DATA
DATA MEANING
1 Language indicated num-
ber
9
Language Information
1
2
6
8
00 A-law/µ-law for the Main
Unit
[For EU] [For Asia]
NOTE:
Set the same value as Remote Unit (CM04 Y=14-59). You cannot set both of A-
law and µ-law in the same Remote UNIT over IP.
00 A-law/µ-law for the
Remote Unit
Y=11: Remote Unit No. 01
Y=40: Remote Unit No. 30
[For EU]
NOTE:
Set the same value as Main Unit (CM04 Y=10-13). You cannot set both of A-law
and µ-law in the same Remote UNIT over IP.
2ND DATA
DATA
01 Japanese
02 English
06 Chinese
08 Korean
CCC Clear
NONE See
JPN
ENG
CHI
KOR
0 A-law
1 µ-law
2 Not used
3 Depends on the CPU
0 A-law
1 µ-law
2 Not used
3 Depends on the CPU
3-19
: Default
RELATED
COMMAND
MEANING
CM04 Y=02
NOTE
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM04
91ch3001.fm