NEC UNIVERGE SV8300 Command Manual page 112

COMMAND CODE TITLE:
08
629 Connected line number indication on DESKCON display in
ETSI ISDN Connected Line Identification Presentation (COLP)
[For EU]
633 Trunk access code display when a call terminates via ETSI
ISDN
[For EU]
644 ETSI ISDN Overlap Sending
[For EU]
649 Ringer Tone Pattern providing for CCIS/SIP incoming call
655 Operation when the PBR/T302 time out occurs
[Russia Only]
664 Operation of hooking/call holding after a station receives warn-
ing SST for forced disconnection
665 Shift from the communication between station and Trunk to
Three Way Calling (Conference [Three/Four Party]) with the
Timer for forced disconnection is in progress
666 Alternative Routing when no answer timer of outgoing call (T1
timer) time-out occurs in tandem connection (CCIS to CCIS)
669 Sending the station status type to the destination office when
the Multiline Terminal/DESKCON calls a station set the DND
over CCIS
672 Releasing the path by RTP monitoring via SIP trunk
NOTE: When the second data of CM08>672 is set to 0, the path is released when the SIP trunk does not receive
RTP for 10 seconds after establishing the path.
676 Output message which is sent from PBX to ISDN network
when the 2nd line is released by Mobility Access hooking
BASIC SERVICES
BASIC SERVICE
BLADE RESET
0 Not provided
1 To provide
0 Available
1 Not available
0 To provide
1 Not provided
0 To provide
1 Not provided
0 Stop connecting
1 Keep connecting
0 Allow
1 Restricted
0 Allow
1 Restricted
0 To provide (CGC sending)
1 Not provided (CFL sending)
0 To send DND setting
1 To send the restriction
0 To provide
1 Not provided
0 As per CM08>677
1 CALL PROC + DISC
3-63
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM08