Replacing The Oven Light; After-Sales Service - Siemens HB 33 K SERIES Instructions For Use Manual

Replacing the
oven light
Replacing the glass cover

After-sales service

E number and FD number
Caution: Unplug the appliance or remove the
fuse! By actuating the miniature circuit-breaker or
by unscrewing the fuses in the fuse box in your
house.
1.
To prevent damage, place a dish towel into the
cold oven.
2.
Remove the glass cover by inserting a knife or
similar object between the glass and the frame.
3.
Replace the lamp.
– Type: Incandescent bulb E 14, 230 – 240 V,
25 W, heat-resistant to 300° C
– You can obtain this lamp from customer
service.
The glass cover on the oven light must be replaced if
it is damaged. Replacement glass covers may be
obtained from the after-sales service. To this end,
please specify the E number and FD number of your
appliance.
Our after-sales service is there for you if your oven
needs repairing.You will find the address and
telephone number of your nearest after-sales service
centre in the phone book. The after-sales service
centres listed will also be happy to advise you of a
service point in your local area.
Please quote the E number (product number) and the
FD number (production number) of your appliance
when contacting the after-sales service. The rating
plate containing these numbers is found on the right,
on the side of the oven door. You can make a note of
these numbers in the space below to save time in the
event of your appliance malfunctioning.
E no.
After-sales service
FD no.
79