Configuring The Tpid Value In Vlan Tags - HP A5830 Configuration Manual

Step...
3. Configure a match criterion to match
the specified inner VLAN IDs
4. Configure a match criterion to match
the specified outer VLAN IDs
5. Return to system view
6. Create a traffic behavior and enter
traffic behavior view
7. Configure the action of marking the
inner VLAN IDs
8. Return to system view
9. Create a QoS policy and enter QoS
policy view
10. Associate the traffic class with the
traffic behavior defined earlier
11. Return to system view
12. Enter Ethernet interface view or port
group view of the service provider
network-side port
13. Apply the QoS policy to the
outgoing traffic

Configuring the TPID value in VLAN tags

You cannot configure the SVLAN TPID and QinQ on a port at the same time.
To configure the TPID value of a VLAN tag:
Step...
1. Enter system view
2. Configure the TPID in the
customer network VLAN
tags
3. Enter interface view or
port group view of the
service provider network-
side port
4. Configure the TPID in the
service provider network
VLAN tags
Command...
if-match customer-vlan-id vlan-id-list
if-match service-vlan-id vlan-id
quit
traffic behavior behavior-name
remark customer-vlan-id vlan-id
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit

Enter Ethernet interface view:
interface interface-type interface-number

Enter port group view:
port-group manual port-group-name
qos apply policy policy-name outbound
Command...
system-view
qinq ethernet-type customer-tag hex-value

Enter Ethernet interface view or Layer 2
aggregate interface view:
interface interface-type interface-number

Enter port group view:
port-group manual port-group-name
qinq ethernet-type service-tag hex-value
152
Remarks
Required
Required
—
Required
Required
—
Required
Required
—
Required
Use either command
Required
Remarks
—
Optional
0x8100 by default
Required
Use either command
Optional
0x8100 by default