Configuring An Inner-Outer Vlan 802.1P Priority Mapping - HP A5830 Configuration Manual

Configure a traffic behavior to tag packets with an outer VLAN tag.

Create a QoS policy and associate the class with the behavior in the policy.

Apply the QoS policy to the port that connects to the user.

To configure selective QinQ:
Step...
1. Enter system view
2. Create a class and enter class
view
3. Specify the inner VLAN IDs of
matching frames
4. Return to system view
5. Create a traffic behavior and
enter traffic behavior view
6. Specify an outer VLAN ID
7. Return to system view
8. Create a QoS policy and
enter QoS policy view
9. Associate the traffic class with
the traffic behavior defined
earlier
10. Return to system view
11. Enter Ethernet interface view
or port group view of the
customer network-side port
12. Enable basic QinQ
13. Apply the QoS policy to the
incoming traffic

Configuring an inner-outer VLAN 802.1p priority mapping

Through QoS policies, the A5830 Switch Series marks the 802.1p priorities in outer VLAN tags according
to the inner VLAN IDs or the 802.1p priorities in the inner VLAN tags:
To mark the 802.1p priorities in outer VLAN tags according to the inner VLAN IDs or the 802.1p priorities
in the inner VLAN tags:
Step...
1. Enter system view
Command...
system-view
traffic classifier classifier-name [
operator { and | or } ]
if-match customer-vlan-id vlan-id-
list
quit
traffic behavior behavior-name
nest top-most vlan-id vlan-id
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit

Enter Ethernet interface view:
interface interface-type interface-
number

Enter port group view:
port-group manual port-group-
name
qinq enable
qos apply policy policy-name
inbound
Command...
system-view
150
Remarks
—
Required
By default, the operator of a class
is AND
Required
—
Required
Required
—
Required
Required
—
Required
Use either command
Required
Required
Remarks
—