Panasonic DBS 824 Manual page 73

Attendant-Controlled Text Assignment
3. Dial #1
4. Press AUTO.
5. Dial the desired system speed dial number (00-89 or 000-199).
6. Press AUTO to backspace and erase the existing name.
7. Use the dialpad sequences shown in Table 2-1 to enter letters and/or
8. To store your entry, press HOLD.
To assign text to Call Waiting/OHVA Text Replies):
1. Pick up the handset or press ON/OFF.
2. Press PROG.
3. Dial #5
4. Dial 1-5, depending on which text message you want to change.
5. Press AUTO to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 to enter letters and/or
7. To store your entry, press HOLD.
Table 2-1. Key sequences for text assignment.
2-8
numbers.
Press FLASH after each letter.
Press CONF to switch between numbers and letters.
numbers.
Press FLASH after each letter.
Press CONF to switch between numbers and letters.
Key Number of Key Presses
Once
1 Space
2 A
3 D
4 G
DBS 824-3.0/3.2-700
Twice Three
times
Q Z
B C
E F
H I
Attendant Features
Four Five
times times
Space q
a b
d e
g h
Revised April 2000
Six
times
z
c
f
i