Call Park - Panasonic DBS 824 Manual

Key Telephone Features
• If the Automatic Outside Line Hold feature is programmed for your
• A held call will recall if it is not retrieved before the Hold Recall Timer
• If you press the HOLD key during a conference with two outside lines,
• If your system is set to onhook transfer and you have placed an outside call
• If there is no response to the Hold Recall, the tone is issued at the
• An error tone is issued if you attempt to place more than one intercom call
• The DBS 824 can provide Music-on-Hold to callers placed on hold. See

Call Park

(CPC-S and CPC-M)
Description
You can use the Call Park function to transfer a call, even if you cannot locate
the intended recipient of the call. Simply park the call, and then page the
person you want to transfer to. That person can answer the call from any
extension by dialing the number of the extension that parked the call.
Operation
To park a call:
1. Press the HOLD key.
Revised April 2000
system, pressing any other line key will place your original call on System
Hold.
expires. "Hold Recall #XX" (where "XX" is the outside line number)
appears on the display if a call has been held beyond the time limit.
both outside lines will be placed on hold.
on hold, and you then make an Intercom Call, make sure the other
extension presses the FLASH key or hangs up before you do. If you hang
up before the other extension, the held outside line will be transferred to
that extension.
Attendant Phone (extension 100 or 10). However, no tone is issued at the
Attendant Phone if Night Mode is activated or if the call is on a Private
Line.
on hold at the same time.
"Music-On-Hold" (page 1-24) for more information.
DBS 824-3.0/3.2-700

Call Park

3-17