Panasonic DBS 824 Manual page 179

Call Forwarding
5. Replace the handset or press ON/OFF.
To cancel Call Forwarding
1. Lift the handset or press ON/OFF.
2. Dial "72."
3. Replace the handset or press ON/OFF.
Related Programming
• FF1 (System): Call Forward -- No Answer Timer
• FF1 (System): Extension Class of Service
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Permanent Call Forward Type
• FF3 (Extension): Permanent Call Forward Extension
• FF10 (Speed Dialing): System Speed Dial Numbers
• FF10 (Speed Dialing): Personal Speed Dial Numbers
Considerations
• Calls can be forwarded to extensions that have call forwarding activated.
• Extensions receiving forwarded trunk calls display "CFWD NNN
- Direct trunk calls
4-8
Note: Outside numbers used for call forwarding must already be
programmed into speed dialing. (See page 4-32 for instructions.)
For example, phone "A" can be forwarded to phone "B," even if phone
"B" is forwarded to voice mail.
XXXXXX," where "NNN" = the extension that forwarded the call and
"XXXXXX" = the trunk name or number.
Calls to an extension with DND or Absence Message turned on are treated
differently, depending on whether they are trunk or intercom calls.
Intercom calls receive busy tone; trunk calls are routed to the extension
defined in permanent call forwarding.
The following types of incoming trunk calls follow permanent call forward
settings:
DBS 824-3.0/3.2-700
DSLT Features
Revised April 2000