Panasonic DBS 824 Manual page 213

SLT Features
Operation
To activate Call Forwarding:
1. Lift the handset.
2. Dial "72."
3. Dial the appropriate call forwarding code.
4. If you're forwarding to an extension, enter the number of the extension
5. Replace the handset.
To cancel Call Forwarding
1. Lift the handset.
2. Dial "72."
3. Replace the handset.
Related Programming
• FF1 (System): Call Forward--No Answer Timer
• FF1 (System): Extension Class of Service
Revised April 2000
The phone issues intercom dial tone.
Call Forward
Type
All
Busy/no answer
Busy
No answer
you want to receive your calls. If you're forwarding to an outside number,
dial "0" plus the appropriate speed dial number.
Note: To forward to an outside number, you must have already
programmed the number into personal or system speed dialing. You can
forward to any speed dial number (system or personal). This requires
pooled trunk access (9, 81-86). However, dial "9" trunk access cannot be
used when Least Cost Routing is active.
DBS 824-3.0/3.2-700
Call Forwarding
Code
0
1
2
4
5-8