Handsfree Answerback - Panasonic DBS 824 Manual

Handsfree Answerback

• If a new code is programmed into a key, the previously programmed code
• To erase a code programmed into a key, press the HOLD key when the
• The system can be programmed so that Pooled Trunk Access calls
• Night Service, DND, and BGM can be activated through FF keys without
• When you are making a call using the Speed Dialing feature, the FLASH

Handsfree Answerback

(CPC-S and CPC-M)
Description
Use the Handsfree Answerback feature to answer a call without lifting the
handset. Your extension must be programmed for Voice Calling for you to
use this feature. If your extension is not set for Voice Calling, the caller must
press "1" during a call to switch from Tone Calling to Voice Calling.
Operation
1. Confirm that the MUTE LED is off.
2. Speak into the microphone.
Related Programming
• FF1 (System): Extension Intercom Calling
Considerations
• Stay within three feet of the microphone.
• The MUTE feature can be selected from the Menu screen on large display
3-42
is erased.
display reads "Enter Code." "Code Cleared" then appears on the display.
automatically use LCR when 9 is selected.
lifting the handset.
key stored in Speed Dialing becomes the PBX flash feature.
If it is lit, press the MUTE key to turn it off.
phones. With other DBS 824 key phones, the MUTE function is assigned
to a fixed key.
DBS 824-3.0/3.2-700
Key Telephone Features
Revised April 2000