Panasonic DBS 824 Manual page 137

Line Appearances
Operation
Operation
To originate a trunk call ...
To place a call on Exclusive Trunk Hold (page 3-29)
...
To place a call on System Trunk Hold (page 3-15) ...
To transfer a call ...
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF1 (System): Alert Tone for Busy Override and OHVA
• FF1 (System): Extension Class of Service Setting
• FF2 (Trunks): Pooled Trunk Access for Group "9"
• FF2 (Trunks): Pooled Trunk Access for Group "81-86"
• FF3 (Extension): Forced Least Cost Routing
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Busy Override Send
• FF3 (Extension): Busy Override Receive
• FF3 (Extension): Page Group (0-7) Extensions
• FF5 (Keys): FF Key Assignments (all)
• FF8 (LCR): LCR Setting (all)
Considerations
• Users can barge into a busy Direct Line (DL) and create a three-party
• "Barge-in for Direct Lines" is controlled by the program settings for Busy
3-50
conference. To barge into a busy Direct Line, the user presses the DL key.
(The DL key will be lit red.)
Override. For instance, if an extension with a DL key does not want the DL
broken into, that extension must have "Busy Override Receive" turned off.
DBS 824-3.0/3.2-700
Key Telephone Features
Action
Press an idle DL key.
The key blinks (green) as the call is made.
Press the DL key.
Press the HOLD key.
Press HOLD, dial the destination exten-
sion, and then press PROG.
Revised April 2000