Table of Contents
Advertisement
3.4 MANAGED ETHERNET SWITCH MODULES
4.
Select the firmware file to be loaded on to the Switch, and select the Open option.
3
The following window will pop up, indicating that the firmware file transfer is in progress.
If the firmware load was successful, the following window will appear:
Note
The switch will automatically reboot after a successful firmware file transfer.
NOTE
5.
Once the firmware has been successfully uploaded to the switch module, load the settings file using the procedure
described earlier.
3-40
N60 Network Stability and Synchrophasor Measurement System
3 HARDWARE
GE Multilin
Advertisement
Table of Contents
