Auxiliary Dc Jack - Yamaha FJR1300-AS Owner's Manual

Instrument and control functions

Auxiliary DC jack

WARNING
To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC jack
is not being used.
NOTICE
3
The accessory connected to the
auxiliary DC jack should not be used
with the engine turned off, and the
load must never exceed 30 W (2.5 A),
otherwise the fuse may blow or the
battery may discharge.
This vehicle is equipped with an auxil-
iary DC jack in the accessory box.
A 12-V accessory connected to the
auxiliary jack can be used when the
key is in the "ON" position and should
only be used when the engine is run-
ning.
To use the auxiliary DC jack
1. Open the accessory box lid. (See
page 3-39.)
2. Turn the key to "OFF".
3. Remove the auxiliary DC jack cap.
1. Auxiliary DC jack cap
4. Turn the accessory off.
EAU39656
EWA14361
ECA15432
1
3-50
5. Insert the accessory plug into the
auxiliary DC jack.
1. Auxiliary DC jack
6. Turn the key to "ON", and then
start the engine. (See page 5-2.)
7. Turn the accessory on.
1