Yamaha FJR1300-AS Owner's Manual page 28

Instrument and control functions
The following pages contain an expla-
nation of the grip warmer, information
display, and windshield functions. See
page 3-43 for an explanation of the
preload and damping force adjusting
functions.
Adjusting the grip warmer
This vehicle is equipped with grip
warmers, which can only be used
3
when the engine is running. There are 4
grip warmer settings.
Setting
Off
Low
Middle
High
To increase the grip warmer tempera-
ture, push the "
switch. To decrease the grip warmer
temperature, push the "
select switch.
NOTICE
 Be sure to wear gloves when
using the grip warmers.
 If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer to the high set-
ting.
 If the handlebar grip or throttle
grip becomes worn or dam-
aged, stop using the grip warm-
ers and replace the grips.
Display
" side of the select
" side of the
ECA17931
Selecting the information display
1 2
GEAR
N
A.TEMP ˚C
25
C.TEMP ˚C
Lo
TIME TRIP
0:06
1. Information display
2. Display–1
3. Display–2
4. Display–3
There are 3 information displays. The
selected information display can be
switched by pushing the select switch.
The following items are shown in the
information displays:
 an odometer display
 tripmeter displays
 a fuel reserve tripmeter display
 an estimated traveling range dis-
play
 an elapsed time display
 an ambient temperature display
 a coolant temperature display
 an average fuel consumption dis-
play
 an instantaneous fuel consump-
tion display
The items shown in each information
display can be selected.
To set or select the items shown, see
page 3-17.
Odometer display:
ODO
3-14
GEAR
3
N
TRIP-1 km
5.0
TRIP-2 km
7.0
ODO km
20
GEAR
N
RANGE
11
FUEL AVG
12.3
CRNT FUEL
12.3
km
20
4
km
km/L
km/L