Yamaha FJR1300-AS Owner's Manual page 63

With the engine turned off:
1. Place the vehicle on the centerstand.
2. Move the sidestand down.
3. Make sure that the start/engine stop
switch is set to "
4. Turn the key to "ON".
5. Shift the transmission into the neutral
position.
6. Keep the front or rear brake applied.
7. Push the " " side of the start/engine
stop switch.
Does the engine start?
YES
With the engine still running:
8. Move the sidestand up.
9. Shift the transmission into gear.
10. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
11. Move the sidestand up.
12. Release the brake.
13. Push the " " side of the
start/engine stop switch.
Does the engine start?
NO
The system is OK. The motorcycle can
be ridden.
Instrument and control functions
".
NO
NO
YES
3-49
WARNING
• The vehicle must be placed on the
centerstand during this inspection.
• If a malfunction is noted, have a
Yamaha dealer check the system
before riding.
TIP
The traction control system
indicator/warning light "TCS" may come
on, but this is not a malfunction.
The neutral switch, a brake light switch
or the YCC-S system may not be
working correctly.
The motorcycle should not be ridden
until checked by a Yamaha dealer.
The sidestand switch may not be
working correctly.
The motorcycle should not be ridden
until checked by a Yamaha dealer.
A brake light switch may not be working
correctly.
The motorcycle should not be ridden
until checked by a Yamaha dealer.
3