Yamaha FJR1300-AS Owner's Manual page 34

Instrument and control functions
2. Push the "MENU" switch to dis-
play "TIME–2" and "TIME–3". To
reset a time trip, push the "RE-
SET" button to select the item to
reset.
Time Trip
TIME-2
3
TIME-3
3. While the selected item is flashing,
push the "RESET" button for at
least 2 seconds.
4. Push the "MENU" switch to return
to the setting mode menu.
Selecting the units
1. Use the select switch to highlight
"Unit".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the "MENU" switch. The unit
setting display will be shown and
"km or mile" will flash in the dis-
play.
0:07
0:07
Unit
km or mile
km/L or L/100km
3. Push the "MENU" switch. "km" or
"mile" will flash in the display.
Unit
km or mile
km/L or L/100km
4. Use the select switch to select
"km" or "mile", and then push the
"MENU" switch.
TIP
When "km" is selected, "L/100km" or
"km/L" can be set as the fuel con-
sumption units. To set the fuel con-
sumption units, proceed as follows. If
"mile" was selected, skip steps 5 and
6.
5. Use the select switch to select
"km/L or L/100km".
6. Push the "MENU" switch, use the
select switch to select "L/100km"
or "km/L", and then push the
"MENU" switch again.
7. Use the
highlight " ", and then push the
"MENU" switch to return to the
setting mode menu.
3-20
km
km/L
km
km/L
select switch to