Yamaha FJR1300-AS Owner's Manual page 39

NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
Cruise control switches
See page 3-8 for an explanation of the
cruise control system.
Menu switch "MENU"
This switch is used to perform selec-
tions in the function display and setting
mode display of the multi-function me-
ter unit.
See "Multi-function meter unit" on
page 3-11 for detailed information.
Select switch "
This switch is used to perform selec-
tions in the function display and setting
mode display of the multi-function me-
ter unit.
See "Multi-function meter unit" on
page 3-11 for detailed information.
Stop mode function switch "
When this switch is pushed, the stop
mode function is activated and the
stop mode function indicator light
comes on.
When the stop mode function is acti-
vated, the function works together with
the YCC-S system to automatically
shift down to 1st gear according to the
vehicle speed.
Instrument and control functions
ECA10062
EAU12781
EAU54231
EAU54221
/ "
EAU55463
"
If this function is activated and the
transmission is in 2nd gear or higher
when the rider stops the vehicle, the
function will automatically shift down
to 1st gear.
TIP
When the stop mode function is acti-
vated, the shift down indicator light will
flash only when the rider attempts to
start off in 2nd gear or higher.
Drive mode switch "MODE"
WARNING
Do not change the D-mode while the
vehicle is moving.
Using this switch changes the drive
mode to touring mode "T" or sports
mode "S".
The throttle grip must be completely
closed in order to change the drive
mode.
The selected mode is shown on the
drive mode display. (See page 3-13.)
The drive mode cannot be changed
while the cruise control system is oper-
ating.
3-25
3
EAU54691
EWA15341