Table of Contents
Advertisement
Figure 14
1. Rear shelf
9. Align the left shelf with the left end of the rear shelf
and the edge of the deck
10. Secure the left shelf to the deck with 2 bolts (1/4-20 x 1
inch), 1 bolt (1/4-20 x 3/4 inch), and 3 locknuts
15). Position the bolt heads to the inside of the deck.
Figure 15
1. Left shelf
11. Align the right shelf with the right end of the rear shelf
and the edge of the deck
Using the left shelf as a template, locate, mark, and drill
three 9/32 inch diameter holes in the deck.
(Figure 12
and
Figure
14).
(Figure
(Figure 12
and
Figure
16).
1. Right shelf
12. Secure the right shelf to the deck with 1 bolt (1/4-20
x 1 inch), 2 bolts (1/4-20 x 3/4 inch), and 3 locknuts.
Position the bolt heads to the inside of the deck.
7
Mounting the New Deflector
Stop
Parts needed for this procedure:
1
Deflector stop
2
Capscrew, 1/4 x 3/4 inch
2
Locknut, 1/4 inch
Procedure
1. Using the new deflector stop as a template, set it on the
original flat deflector stop
new deflector stop is flush at the bottom, contacting
the side of the deck, and parallel with the outside edge
of the deflector support.
10
Figure 16
(Figure
17). Ensure that the
Advertisement
Table of Contents
