Setup - Toro 44547 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Media and Additional Parts
Description
Parts Catalog
Operator's Manual
Operator Training Material
Certificate of Compliance
Note: Determine the left and right sides of the machine
from the normal operating position.
Note: To install and operate the debris blower, the traction
unit must be a 4 Wheel Drive machine which is equipped
with the Front Quick Attach Front Frame, Model 30509 and
one of the following; the Electric Accessory Kit, part no.
115–0019 or the Joystick Kit, model 31219.
Description
No parts required
Drive shaft assembly
Roll pin
Bolt, 5/16 x 1-3/4 inch
Lock nut, 5/16 inch
Mounting plate
Bolt, 1/2 x 1-1/4 inches
Lock nut, 1/2 inch
Debris blower assembly
Locking pin
Hair pin cotter
Proximity switch assembly
Sensor plate
Carriage screw, 5/16 x 1–1/4 inch
Flange nut, 5/16 inch
General Purpose Lithium Base Grease
Qty.
–
1
1
2
2
1
4
4
1
1
1
1
1
2
2
A/R
Qty.
1
Read before operating.
1
1 View before operating the machine
1 Ensure CE compliance.
6
Use
Remove the blower from the crate
Install the drive shaft to the blower gear
box shaft
Install the mounting plate to the debris
blower frame
Mount the blower to the traction unit
Install the proximity switch
Grease the machine
Use