Table of Contents
Advertisement
Product Overview
Specifications
Note: Specifications and design are subject to change
without notice.
Net weight
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
Operation
Adjust Discharge Opening
The discharge opening (Figure 5) is adjustable to
increase or decrease air output velocity and volume.
Decreasing discharge opening size will increase velocity.
235 lb. (107 kg)
1. Loosen discharge opening deflector mounting
1. Discharge opening
2. Pivot deflector to desired opening.
3. Tighten mounting screws.
Operating Tips
Discharged air has considerable force and could
cause injury or loss of footing.
• Stay away from discharge opening when
• Keep bystanders away from discharge opening
Practice blowing material. It is advisable to blow the
same direction the wind is blowing to prevent material
from blowing back into the cleared area.
Note: If the attachment adapter becomes stuck to the
traction unit adapter, insert a prybar/screwdriver into
the pry slot to disengage the parts (Figure 6).
8
screws (Figure 5).
Figure 5
deflector
WARNING
machine is operating.
when machine is running.
1
G003812
2
2. Mounting screw
Advertisement
Table of Contents
