Table of Contents
Advertisement
Introduction
This product complies with all relevant European
directives, for details please see the separate product
specific Declaration of Conformity (DOC) sheet.
The debris blower is mounted to a ride-on machine
which is intended to be used by professional, hired
operators in commercial applications. It is primarily
designed to use wind power to quickly clear large areas
of unwanted debris on well-maintained lawns in parks,
golf courses, sports fields, and on commercial grounds.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
© 2009-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Before Operating ................................................. 3
While Operating................................................... 3
Maintenance......................................................... 3
Safety and Instructional Decals ............................. 4
Setup............................................................................ 6
Unit.................................................................. 6
2 Adjusting the Link Assembly.............................. 7
3 Grease the Blower ............................................. 7
Product Overview ........................................................ 8
Specifications ....................................................... 8
Attachments/Accessories..................................... 8
Operation..................................................................... 8
Adjust Discharge Opening.................................... 8
Operating Tips ..................................................... 8
Maintenance............................................................... 10
Lubrication......................................................... 10
Bearing Alignment.............................................. 10
Torquing Fasteners ............................................. 11
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
Advertisement
Table of Contents
