Table of Contents
Advertisement
Operation
Operating Tips
Warning
Discharged air has considerable force and could
cause injury or loss of footing.
Stay away from discharge opening when
machine is operating.
Keep bystanders away from discharge opening
when machine is running.
Start the traction unit and run at a low RPM.
Lower the blower using the traction unit lift
mechanism.
Engage the PTO while the engine is at idle speed.
Increase the PTO speed to 1800 RPM.
Practice blowing material. It is advisable to blow the
same direction the wind is blowing to prevent material
from blowing back into the cleared area.
Transporting Blower
Reduce the engine speed to idle position.
Disengage the PTO and wait for the PTO to stop.
Raise the blower to transport position.
Adjust Discharge Opening
The discharge opening is adjustable to increase or decrease
air output velocity and volume. Decreasing discharge
opening size will increase velocity.
1. Loosen discharge opening deflector mounting screws
(Fig. 6).
1
1. Deflector
2. Pivot deflector to desired opening.
3. Tighten mounting screws.
10
2
Figure 6
2. Mounting screw
Advertisement
Table of Contents
