Checking Fluid Levels; Installing The Grass Basket - Toro 04018 Operator's Manual

Figure 10
1. Locking clip
3. Rotate wheel back and forth until it slides
completely onto axle and locking clip is secured
in groove on axle shaft.
4. Repeat procedure on opposite side of machine.
5. Inflate the tires to 12-15 psi.
6. Carefully lift up on handle support to release
kick stand.
Step
5

Checking Fluid Levels

No Parts Required
Procedure
1. Check the engine oil level, refer to Checking
the Engine Oil Level in Engine Maintenance,
page 24.
2. Check the transmission fluid level, refer to
Checking the Transmission Fluid Level in
Drive System Maintenance, page 27.
Step
6

Installing the Grass Basket

Parts needed for this step:
1 Grass basket
Procedure
Grasp basket by top lip and slide basket frame into
the receivers (Figure 11).
Figure 11
1. Grass basket
13
2. Basket receivers