Specifications; Attachments/Accessories - Toro 23511 Operator's Manual

Figure 10
Refer to the seeding graph located on the machine to
determine the correct gauge setting for the type of grass you
are planting and the thickness in which you want to plant it.
Seed Gate Control Lever
Push the seed gate control lever (Figure 11) forward to start
the seed flow, and pull it rearward to stop the seed flow.
Note: The machine is designed so that the seed flow slows
and/or stops when you stop the machine or slow for a turn.
To reduce seed loss raise the front wheels as the machine is
turned. There is no need to turn the seed flow on and off
for each turn.
1. Seed gate control lever
Figure 11

Specifications

Note: Specifications and design are subject to change
without notice.
Width
Length (operating)
Length (with handle stored)
Height (operating)
Height (with handle stored)
Weight

Attachments/Accessories

Approved attachments and accessories are available for use
with the machine to enhance and expand its capabilities.
Contact an Authorized Service Dealer or Distributor or go
to www.Toro.com for a list of all approved attachments and
accessories.
12
70 cm (27.5 inches)
130 cm (51 inches)
96.5 cm (38 inches)
94 cm (37 inches)
63.5 cm (25 inches)
77 kg (170 lbs)