Maintenance Schedule - Toro 07200 Operator's Manual

Minimum Recommended Maintenance Intervals
Maintenance Procedure
Check battery fluid level/
cable connections
Lubricate all grease fittings
Inspect the condition and wear of the tires
Check front differential oil level (4-wheel drive)
‡Change engine oil and filter
Inspect cooling system hoses
Check governor oil level
Check cable adjustments
Check alternator and fan belts
Service the air filter
Check front axle boot joint (4-wheel drive)
Check engine RPM (idle and full throttle)
Torque the wheel lug nuts
Check front wheel alignment
Inspect service and parking brakes
Inspect fuel lines
Replace fuel filter
Replace the transaxle filter
Change the transaxle oil
Clean the transaxle strainer
Pack front wheel bearings (2-wheel drive)
Change the front differential oil (4-wheel drive)
Adjust valves
Replace spark plugs and check timing
Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace all interlock switches
Flush the cooling the cooling system and replace fluid
Change the brake fluid
Rep;lace the timing belt

Maintenance Schedule

Every 50
hours
Maintenance Interval& Service
Every Every
Every
100 200
hours hours
Annual Recommendations
Items are recommended every 1200 hours
or 2 years, whichever occurs first.
Replace the engine timing belt every 2,000
hours or 2 years, whichever comes first.
Maintenance
Every
800
400
hours
hours
29