Figure 48
Note: When using different oil, drain all old oil from
the crankcase before adding new oil.
Changing the Engine Oil and
Filter
Service Interval: Every 250 hours
1. Start the engine and let it run 5 minutes to allow the
oil to warm up.
2. Park the machine on a level surface, shut off the engine,
remove the key, and wait for all moving parts to stop
before leaving the operating position.
3. Replace the engine oil and filter
4. Add oil to the crankcase; refer to
Engine-Oil Level (page
42
(Figure
49).
Figure 49
Checking the
41).