Installing The Rear Wheels; Installing The Front Wheels; Installing The Steering Wheel; Wheel Assembly - Toro 07253 Operator's Manual

Installing the Rear Wheels

Note: This procedure is only needed for Model No.
07253TC.
1. Remove the fasteners securing the wheels.
2. Remove the shipping bracket secured to the wheel
studs.
3. Mount the wheels with the previously removed
fasteners (Fig. 2) and torque to 45–65 ft.-lb.
(61–88 N m).
3
Figure 2

1. Wheel assembly

2. Wheel nut

Installing the Front Wheels

Note: This procedure is only needed for Model No.
07253TC.
1. Remove the fasteners securing the wheels.
2. Remove the shipping bracket from the spindles.
3. Apply Loctite (blue) to the screw threads.
4. Mount the wheels with the previously removed
fasteners (Fig. 3) and torque the bolts to 135–165 ft.-lb.
(183–224 N m)
1
2
3. Wheel stud
15
2
Figure 3
1. Tire and wheel assembly
2. Spindle
3. Small washer

Installing the Steering Wheel

Note: This procedure is only needed for Model No.
07253TC.
1. Remove the nut and lock washer from the steering
shaft.
2. Slide the steering wheel and washer onto the shaft.
Position the steering wheel on the shaft so that the cross
beam is horizontal when the tires are pointed straight
ahead and the thicker spoke of the steering wheel is
downward.
3. Secure the steering wheel to the shaft with the nut
(Fig. 4).
1
Figure 4

1. Steering wheel

2. Nut
1
3
4
5
6
4. Large washer
5. Screw

6. Dust cap

2
3
4

3. Washer

4. Foam seal