Toro 74310 Operator's Manual page 27

WARNING
Loading a machine onto a trailer or truck increases
the possibility of a tip-over and could cause serious
injury or death.
• Use extreme caution when operating a machine
on a ramp.
• Use only a full-width ramp; do not use individual
ramps for each side of the machine.
• If a full width ramp is not available, use enough
individual ramps to simulate a full width ramp.
• Do not exceed a 15-degree angle between the
ramp and the ground or between the ramp and
the trailer or truck.
• Avoid sudden acceleration or deceleration while
driving the machine on a ramp as this could
cause a loss of control or a tip-over.
27