Toro 74310 Operator's Manual page 12

With 42in or 48in direct-collect cutting unit
Hide thumbs Also See for 74310:
Table of Contents

Advertisement

1. Warning-Read the Operator's Manual. Do not operate this
machine unless you are trained. Wear hearing protection.
2. Sliding, tipping hazard—Do not use the machine near
drop-offs with slopes greater than 15 degrees, use the
machine a safe distance form drop-offs on slopes less than
15 degrees; Do not turn sharply while traveling fast, drive
slowly when turning.
3. Warning—Do not use dual ramps, use one piece ramps when
transporting machine; Do not use ramps with inclination
greater than 15 degrees.
4. A rollbar is available and its use is recommended for areas
where there are slopes, drop-offs, or water
Molded into Front of Hopper
5. Warning—Stay away from moving parts; keep all guards
in place. Stop engine and remove key before adjusting,
servicing, or cleaning.
6. Warning—Disengage PTO, move speed control lever to
neutral position, engage parking brake, and stop engine
before leaving the operator's position.
7. Thrown object hazard—Pick up objects that could be thrown
by mower. Do not operate when people and pets are in the
area. Keep deflector in place.
8. Crushing/dismemberment hazard of bystanders—Do not
carry passengers, look forward and down when operating the
machine, look behind and down when reversing.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74312Z master 8000 series74313

Table of Contents